Iwata Power Jet Pro compressor

The Iwata Power Jet Pro is a remarkably quiet, feature rich dual-station airbrush compressor with low to high output from 1-60 PSI. It is completely set up to operate two airbrushes conveniently and independently at the same time. It is oil-free and low maintenance.

Auto shut-off technology enables the compressor to shut itself off when not in use. This feature upgrade is known to lengthen the life span of the compressor motor because it reduces the workload of the motor over time.

Two fully adjustable, mounted air regulators allow you to independently control air pressure to two airbrushes with two mounted gauges that displays precise air pressure.

Two moisture filters prevent pulsation and trap condensation, delivering clean, dry air.

Iwata Power Jet Pro has a 1/6 hp motor and a 2 litre air storage tank. The modern Iwata Power Jet Pro allows easy access to the air intake filter for quick filter changes. The protective outer case adds durability and has two mounted airbrush holders so that you can conveniently rest your airbrushes when not in use.

Iwata Power Jet Pro comes with two high strength polyurethane air hoses for Iwata airbrushes that attach to the compressor with convenient quick disconnect fittings. We include an extra air intake filter and adapter fittings for Badger, Aztek and Paasche brand airbrushes. Also included is a detailed operation manual.

The Power Jet Pro features:

• Low Maintenance: Oil-less twin piston air compressor
• Pressure Category: Low to High
• Horsepower (HP): Quiet running 1/6 Hp induction motor
• Air flow at 60 psi: 1.08 CFM (31 LPM)
• Working pressure: 0 psi to 60 psi
• Air Storage Tank Capacity: 2 litre
• Automatic Shut-Off: Enables the compressor to shut itself off when not in use
• • 2 x Moisture filters: Removes the moisture and prevents pulsing
  • 2 x Pressure gauges: Displays the air pressure clearly
  • 2 x Air regulators: For precise air pressure adjustment
  • Includes Hoses: 2 x High strength polyurethane for Iwata airbrushes
  • Includes Adapters: For Badger, Aztek and Paasche air hoses
  • Airbrush Holder: 2 x Built-in airbrush holders
  • Outlets: 2 x 1/4 BSP Outlets with convenient quick disconnect fittings
  • Assembled Dimensions (inches): 6.67 x 12.99 x 12.32
  • Assembled Dimensions (mm): 177 x 330 x 313
  • Weight: 11.72kg / 25.84lbs
  • Voltage: 220-240V 50Hz
  • Noise level: 62 decibels
  • Duty cycle: 60 Minutes continuous use. Please allow the motor to rest for at least 20 minutes after each cycle of continuous use

  The Power Jet Pro is suitable for running two of the following airbrushes concurrently: (depending on the type of application, the airbrush models, the required airflow and required pressure. Please call for specific advice). A multiple-outlet manifold is additionally required to connect more than one airbrush.

  • Neo for Iwata: CN, BCN, TRN1, TRN2
  • Iwata Revolution: BR, CR, CR3, SAR, BCR, TR1, TR2, M1, M2
  • Iwata Eclipse: BS, CS, TAKUMI, SBS, BCS, (or one G-SERIES – G3, G5, G6)
  • Iwata HP/HP-PLUS: ALL MODELS
  • Iwata Hi-Line: ALL MODELS (will only run one HP-TH or HP-TH2)
  • Iwata Custom Micron: ALL MODELS
  • Iwata Kustom: ALL MODELS (or one KUSTOM-TH)
  • Paasche: CC, F, Talon, V, VJR, VSR90, VV
  • Badger: 100, 150
  • Sparmax: SP35/C, MAX-3, MAX-4, HB-040, SP-20X
  • Sparmax: DH-125, GP-35, GP-50, Premi Air G35
    
    

  The Power Jet Pro is suitable for running one of the following airbrushes, small spray guns or similar:

  • Paasche: H, HS, VL, VLS, MIL-SET,
  • Badger: 150-HD, 155, 175, 250, 260, 350
  • Sparmax GP-850
  • Flake King: 500